Buy inexpensive MP Filtri Products
MP Filtri Replacement Hydraulic Filter Elements
Return filters are used as process and safety filters to protect pumps and hydraulic circuits from contamination as per ISO 4406.
They are available in 4 styles:
MPF semi-immersed filters for mounting to the oil tank with external/internal filter element
MPT semi-immersed filters for mounting to the oil tank with external/internal filter element
MPH/MPI semi-immersed filters for mounting to the oil tank with external/internal filter element
FRI semi-immersed filters for mounting to the oil tank or in-line, available in the single or duplex versions, with external/internal filter element
The FRI version can also be used as an in-line filter for forced lubrication or off-line systems.
They are available in 4 styles:
MPF semi-immersed filters for mounting to the oil tank with external/internal filter element
MPT semi-immersed filters for mounting to the oil tank with external/internal filter element
MPH/MPI semi-immersed filters for mounting to the oil tank with external/internal filter element
FRI semi-immersed filters for mounting to the oil tank or in-line, available in the single or duplex versions, with external/internal filter element
The FRI version can also be used as an in-line filter for forced lubrication or off-line systems.
Suction filters are used as safety filters to protect pumps from gross contamination which can cause them to grip.
They are available in 3 styles:
STR series immersed filters
FAS external filters, for mounting above the oil level
SF2 external filters, for mounting semi-immersed under the oil level
SF2 semi-immersed filters, which shut off oil flow while the filter element is being replaced, replace the butterfly valves usually used for servicing hydraulic pumps.
They are available in 3 styles:
STR series immersed filters
FAS external filters, for mounting above the oil level
SF2 external filters, for mounting semi-immersed under the oil level
SF2 semi-immersed filters, which shut off oil flow while the filter element is being replaced, replace the butterfly valves usually used for servicing hydraulic pumps.
High pressure filters are used as process filters to protect individual valves or the entire hydraulic circuit from contamination as per ISO 4406. 11 versions are available with operating pressures ranging from 110 bar to 560 bar. A range of products is available to resolve all filter mounting problems, in the following configurations:
In-line, with threaded and flange mounts
Manifold top mounting
Manifold side mounting
Manifold mounting, to DIN 24340 CETOP R 35 H
Manifold threaded/flange mounting in the top extraction filter cartridge version
Duplex versions for continuous operation requirements
In-line, with threaded and flange mounts
Manifold top mounting
Manifold side mounting
Manifold mounting, to DIN 24340 CETOP R 35 H
Manifold threaded/flange mounting in the top extraction filter cartridge version
Duplex versions for continuous operation requirements
In-line medium pressure filters are used as process filters to protect pumps, pressure reducers and hydraulic circuits from contamination as per ISO 4406.
They are available in 3 styles:
In-line
Duplex In-line
Manifold mounted in parallel
LMP 110-120-124-210-211-400-900-950 filters for mounting in-line.
They are available in 3 styles:
In-line
Duplex In-line
Manifold mounted in parallel
LMP 110-120-124-210-211-400-900-950 filters for mounting in-line.
Spin-On filters are used as process and safety filters to protect individual pumps, valves or the entire hydraulic circuit from contamination as per ISO 4406.
Operating pressure 12 bar.
In-line Spin-On filters can be used for the following purposes:
Suction filters
On the return circuit, for mounting on the line or on the tank cover
In-line for low pressure
Spin-On filters are available in 4 configurations:
Single cartridge in-line
In-line with two parallel cartridges on the same axis
In-line with two parallel cartridges mounted side by side
With single cartridge flange for installation to the tank cover
All versions may be equipped with visual and/or electrical blockage indicators
Operating pressure 12 bar.
In-line Spin-On filters can be used for the following purposes:
Suction filters
On the return circuit, for mounting on the line or on the tank cover
In-line for low pressure
Spin-On filters are available in 4 configurations:
Single cartridge in-line
In-line with two parallel cartridges on the same axis
In-line with two parallel cartridges mounted side by side
With single cartridge flange for installation to the tank cover
All versions may be equipped with visual and/or electrical blockage indicators
Spin-On filters are used as process and safety filters to protect individual pumps, valves or the entire hydraulic circuit from contamination as per ISO 4406.
Operating pressure 35 bar.
In-line Spin-On filters can be used for the following purposes:
On the return circuit, for mounting on the line or on the tank cover
In-line for low and medium pressures
Spin-On filters are available in single cartridge in-line.
All versions may be equipped with visual and/or electrical blockage indicators
Operating pressure 35 bar.
In-line Spin-On filters can be used for the following purposes:
On the return circuit, for mounting on the line or on the tank cover
In-line for low and medium pressures
Spin-On filters are available in single cartridge in-line.
All versions may be equipped with visual and/or electrical blockage indicators
Hydraulic comby Filter for filtration return linee and suction on the hydrostatic transmissions for mobile machine
High pressure in-line stainless steel filters are used as process filters to protect individual valves or the entire hydraulic circuit from contamination as per ISO 4406. Versions are available with operating pressures ranging from 320 bar and 1000 bar.
The indicator is set to alarm before the element becomes fully clogged.
MP Filtri can supply indicators of the following designs:
Vacuum switches and gauges
Pressure switches and gauges
Differential pressure indicators
These type of devices can be provided with warning signals visual, electrical or both signals.
It is available only for differential type indicators, The electronic model with warning signals to 75% and to 100% of clogging provided thermal lockout.
MP Filtri can supply indicators of the following designs:
Vacuum switches and gauges
Pressure switches and gauges
Differential pressure indicators
These type of devices can be provided with warning signals visual, electrical or both signals.
It is available only for differential type indicators, The electronic model with warning signals to 75% and to 100% of clogging provided thermal lockout.
Bell Housing & Coupling:
Bell housings for connecting motor and pump, the full range allows for selecting a variety of product configurations including single-casting housing, two- and three-module housings and soundproofed housings, with maximum electric motor power 400 kW. Motor-pump drive power transmission couplings in aluminium, cast iron and steel. Elastic inserts of various hardnesses as connectors between the couplings. Damping rings for vertical and horizontal installation in motor/pump assembly tanks. Mounting feet to support the motor/pump assembly when the motor is not equipped with feet. Aluminium tanks. Inspection doors
Bell housings for connecting motor and pump, the full range allows for selecting a variety of product configurations including single-casting housing, two- and three-module housings and soundproofed housings, with maximum electric motor power 400 kW. Motor-pump drive power transmission couplings in aluminium, cast iron and steel. Elastic inserts of various hardnesses as connectors between the couplings. Damping rings for vertical and horizontal installation in motor/pump assembly tanks. Mounting feet to support the motor/pump assembly when the motor is not equipped with feet. Aluminium tanks. Inspection doors
Tank filler and breather filter are used for the filtration of the incoming air to the tanks of hydraulic systems and for filling the oil on the hydraulic tank.
Available in versions with: threaded connection, welded and flange mounting with screws
Available in versions with: threaded connection, welded and flange mounting with screws
Filler caps for filling oil in the hydraulic tanks.
Visual level indicators of fluid for hydraulic tank.
Visual/Electrical level indicators of fluid for hydraulic tank.
Electrical level indicators of fluid for hydraulic tank.
Electrical level indicators of fluid for hydraulic tank.
Accessories for hydraulique systems and tanks.
Contamination Monitoring Products & Mobile Filtration Units.
Seller of MP Filtri Products
MP Filtri S.p.A. is an Italian multi-national company specialising in filtration products for the hydraulic fluids sector, founded by Bruno Pasotto in 1964, with its headquarters at Pessano con Bornago (Milan).
Most production is carried out at its Italian facilities in Lombardy. It currently has eight trading and operational subsidiaries in Germany, France, Great Britain, the United States, Canada, Russia, India and China and a global network of retailers and distributors in over 100 countries.
Most production is carried out at its Italian facilities in Lombardy. It currently has eight trading and operational subsidiaries in Germany, France, Great Britain, the United States, Canada, Russia, India and China and a global network of retailers and distributors in over 100 countries.
This Website is for sale!
Recommended price is 3000 Euro.
If you want to buy this site with domain and code, Please transfer 3000 Euro to this account and notify loverlifecode@gmail.com
Copyright © 2015-2022 MP FILTRI Company. All Rights Reserved. Thanks to AriaCoders